China China OEM Pole Transformer - GCS type low-voltage withdrawable switchgear – Pengbian Manufacturer and Supplier

China OEM Pole Transformer - GCS type low-voltage withdrawable switchgear – Pengbian

Short Description:

Product Detail

Product Tags

Feedback (2)

We persist with the principle of "quality 1st, assistance initially, continual improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the standard objective. To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for High Quality Energy Saving Substation , 1000 Kva Transformer , Outdoor Network Cable Box , Please feel free to contact us at any time. We will reply you when we receive your inquiries. Please note that samples are available before we start our business.

China OEM Pole Transformer - GCS type low-voltage withdrawable switchgear – Pengbian Detail:

Overview

GCS type low-voltage withdrawable switchgear is suitable for power distribution systems in power plants, petroleum, chemical, metallurgy, textile, high-rise buildings and other industries. In large-scale power plants, petrochemical systems and other places with a high degree of automation and computer interfaces, as a three-phase AC frequency of 50 (60) Hz, rated working voltage of 380V (400) V, (600) V, and rated current of 4000A Low-voltage complete set of power distribution devices used in power distribution, centralized motor control, and reactive power compensation in power generation and power supply systems and below.

Model meaning

MODEL: GCS □ □ □	G:	Enclosed switch cabinet
	C:	Withdrawable
	S:	Electrical System
	□：	Auxiliary circuit scheme number
	□：	Main circuit scheme number

Structural features

1. The main frame of the device adopts 8MF steel, and the frame adopts two structural forms: assembled and partially welded. There are mounting modulus holes E=20mm on the main frame.

2. The functional rooms of the device are strictly separated. The compartments are mainly divided into functional unit rooms, busbar rooms, and cable rooms. The functions of each unit are relatively independent.

3. Dimension series of the device cabinet (unit: ㎜) High 2200 Width 400* 600* 800* 1000 Depth 800 *1000* 800* 1000* 600 *800 *1000 *600* 800 *1000*2200

Electrical panels Basic Parameters

electrical panels Rated voltage of main circuit (V)		AC 380(400)(660)
electrical panels Rated voltage of ancillary circuit (V)		AC 220 380(400) DC 110 220
electrical panels Rated frequency (Hz)		50(60)
Nominal insulation voltage (V)		660(1000)
Rated current (A)	Horizontal bus	≤4000
	Vertical bus (MCC)	1000
Bus rated short-time withstand current (KV/1S)		50 80
Bus rated peak withstand current (KV/0.1S)		105 176
Degree of protection		IP3X IP4X

Main Structure The main structure adopts 8FM opening section steel, in both sides of which there are two mounting holes with modulus 20mm and 100mmφ9.2mm respectively. The internal mounting is flexible and convenient. The main structure has two alternatives of mode of assembly, i.e. fully assembled structure and the structure with welded part frames and beam. All the function chambers of the cabinet are separated. The compartments include a functional unit chamber, a bus chamber and a cable chamber. All the chambers are independent relatively. The horizontal main bus bar is arranged horizontally on the cabinet back for the purpose of enhancing the bus’s capability of resisting electromotive power. This is a basic measure to make the main circuit have a high short circuit withstand strength. The design of cable compartment enables the cables to pass through upwards or downwards to be extremely convenient.

The electrical panels universal dimensions (mm) of the cabinet are shown in the following table

Height	2200
Width	400		600		800			1000
Depth	800	1000	800	1000	600	800	1000	600	800	1000

Electrical panels Functional Units

The course height of drawer is 160mm, including such five dimensions as 1/2 unit, 1 unit, unit, 2 units and 3 units. The rated current of unit circuit is up to and including 400A. The modification of drawer is generally made to the height but not to that of width and depth. The drawers with same fictional units are interchangeable. Each MCC cabinet is able to mount 11 1-unit or 22 1/2-unit at most. The incoming and outgoing lines of drawer adopt the chip structure socket connectors with different number of chips but same specification according to the current intensity. The drawers of 1/2 unit are switched to the cable chamber by means of the ZJ-2 type switch parts of back plate type structure. The unit drawer is switched to the cable chamber by means of bar or tubular ZJ-1 type switch parts of the same size according to the classification of current. There are obvious marks in the positions of separation, closing, test and drawing out in the drawer panel. The drawer unit is equipped with a mechanical interlocking device.

Ordering Instructions The purchase contract should cover the following items. The full series of product includes the numbers of main circuit scheme and ancillary circuit scheme. Diagram on the combination sequence of main circuit system Electric schematic diagram of ancillary circuit List of components in cabinets Voltage, current and time and other adjustment variables in circuit Other special requirements differing from normal using of product

Product detail pictures: